METHOD OF DETERMINING THE ONSET MOMENTS NEED SCALE BOILER CLEANING MOBILE UNITS OIL AND GAS COGENERATION TECHNOLOGICAL TRANSPORT

  • I. M. Bogatchuk Івано-Франківський національний технічний університет нафти і газу
  • I. B. Prunko Івано-Франківський національний технічний університет нафти і газу
  • M. I. Bogatchuk Центр нормативно-економічних досліджень ПАТ "Укрнафта" м. Івано-Франківськ
Keywords: coil steam boiler feed water

Abstract

In this article discusses the definition of time of the washing steam boiler steam coils by determining the pressure difference at the input and output steam pipeline, which will stop the deposition of scale on the walls of the coil, to prevent burnout and coil gap, and in this regard to reduce fuel consumption for steam generation.

The essence of the proposed method is explained as follows. According to the laws of hydraulics determine the pressure loss by changing the internal volume coil boiler heat-loheneratora. Loss of pressure by changing the internal volume determined by the formula Darcy.

Calculations carried out for real volume and possible changes to the estimates we obtain for the schedule. According to the schedule, depending on the thickness of scale can be set, which should be the pressure difference at the inlet and outlet of the boiler heat generator. Field of use of the work - Steam installation process oil and gas transport.

Thus, we have proved the economic feasibility to carry out the acid treatment coils foam without waiting for regulatory deadlines (48 - 72 h.). The method of determining the onset time of acid treatment, based on the values of the pressure drop on the coil and circuit device for fixing the onset of this moment. This will not only achieve fuel economy, but also will prevent the failure of process equipment.

References

Установка промысловая паровая передвижная ППУА-1200/100. Техническое описание и инструкция по эксплуатации ( 25.00.00.000 ТО). – 1989. – 72с.

Установка промысловая паровая передвижная ППУА-1600/100. Руководство по эксплуатации (ТУ 26-02-987-85). ОАО «Нальчикский машиностроительный завод» – Нальчик : КБР, 2005. – 73 с.

Паровая передвижная установка ППУ-3М : каталог – М. : Недра, 1971. – 43 с.

Байбаков Н. К. Термоинтенсификация добычи нефти / Н. К. Байбаков, В. А. Брагин, А. Р. Гарушев, И. В. Толстой. – М. : Недра, 1971. – 280 с.

Очистка котлов и теплообменников [Електрон. ресурс]. – Режим доступу : http://tehgidro.com.ua/rus/truby.

Окоча А. І. Довідник по паливу і мастильних матеріалах / А. І. Окоча, Я. Ю. Білоконь. – К. : Урожай, 1988. – 184 с.

Колесник П. А. Материаловедение на автомобильном транспорте. – М. : Транспорт, 1987. – 271 с.

Гидравлика, гидромашины и гидроприводы : учебник для машино-строительных вузов / Т. М. Башта, С. С. Руднев, Б. Б. Некрасов и др. – М. : Машиностроение, 1982. – 423с.

Кутателадзе С. С. Основи теорії теплообміну / С. С. Кутателадзе. – М. : Атомиздат, 1979. – 416 с.

Published
2015-08-26