STUDY OF THE EFFECT OF TIGHTENING VALUES OF FIBER OPTIC PRESSURE SENSOR MEMBRANE ON ITS GEOMETRY

  • I. V. Hudyakov Херсонське морехідне училище рибної промиловості
  • A. V. Alekseev Херсонська державна морська академія
Keywords: finite element method, amplitude fiber-optic pressure sensor of the reflective type, membrane, value of tightening force

Abstract

Effect of the tightening force on the geometry of membrane deformation of the amplitude fiber optic pressure sensor of the reflective type is considered. The study was conducted using finite element method, which is one of the main tools for simulating sensors and their elements in the software package SolidWorks. The influence of the magnitude of tightening force of membrane on the optical gate was investigated; which in turn affects the basic characteristics of the sensor such as noise, sensitivity, linearity and so on. It was discovered that increase in the tightening force leads to the appearance of non-linearity of sensor characteristics in the initial measuring range; high tightening increases non-linearity. This means that the tightness must be changed to decrease, however, without compromising sensor impermeability. The area adjacent to the center of membrane is regarded to be the most appropriate for the signal measuring, in terms of getting a linear characteristic. This article ascertains the nature of the nonlinear changes in the optical gate as a function of tightening; it allows to adjust the characteristics of the sensor.

References

Тайманов Р. Е. Метрологический самоконтроль датчиков / Р. Е. Тайманов, К.В. Сапожникова // Датчики и системы. – 2011. – № 2. – С. 58-66.

ГОСТ Р 8.673-2009 ГСИ. Датчики интеллектуальные и системы измерительные интеллектуальные. Основные термины и определения.

Henry M. P. The Self-Validating Sensor: Rationale, Definitions and Examples / M. P. Henry, D. W. Clarke // Control Engineering Practice. – 1993. – Vol. 1, no. 4. – P. 585-610.

Xiao Z. Diaphragm deflection of silicon interferometer structures used as pressure sensors / Xiao Z., Engstrom O., Vidovic N. // Sensors and Actuators A. – 1997. – no. 58. – р. 99.

Богуш М. В. Анализ функции преобразования пьезоэлектрических датчиков давления методом конечных элементов / М. В. Богуш, Э. М. Пикалев // Известия ЮФУ. Технические науки. – 2008. – № 2. – С. 74-84.

Козлов А. И. Моделирование тензопреобразователей давления на основе структур КНС. Одномембранные преобразователи / А. И. Козлов, А. В. Пирогов, В. М. Стучебников // Датчики и системы. – 2008. – № 1. – С. 6-11.

Козлов А. И. Моделирование тензопреобразователей давления на основе структур КНС. Двухмембранные преобразователи / А. И. Козлов, А. В. Пирогов, В. М. Стучебников // Датчики и системы. – 2009. – № 8. – С. 50-53.

Published
2014-12-26